Automatic PE Branch Injection Molding and Yellow Core-line PaintingSystem
Key words:Automation Equipment
Fully automatic PE leaf injection molding yellow core system
Classification:
Product Description
| Key Parameters | Model | Fully Automatic Yellow Core Machine | Key Parameters | Model | |||
| 1480SZ-2-350 | 1480SZ-4-350 | LH-HXJ-121-M0 (Multi-Fork) | LH-HXJ-121-MS (With Scissor Structure) | ||||
| Pine Branch Robot | Maximum Width of Machine Body | 1480mm | 1480mm | Maximum Width of Machine Body | Approximately 780mm | ||
| Effective Width of Machine Body | Approximately 1580mm | 1400mm | Maximum Length of Machine Body | Approximately 1925mm (excluding receiving rack) | |||
| Maximum Height of Machine Body | Approximately 1580mm | Maximum Height of Machine Body | Approximately 1400mm | ||||
| Minimum Clamping Depth | 165mm | Applicable Injection Molding Machine Molds | One Out Two | ||||
| Allow Molds to Be Below Installation Plane Value | 170mm | Applicable Wire Hardness | Common Wire and Steel Wire | ||||
| Maximum Wire Length | 350mm | 500mm | Applicable Product Styles for Fixture | Minimum Center Distance is 65mm | |||
| Material Discharge Frame Size | 320mm | 360mm | Air Duct Size ① | Same Size as Robot Material Discharge Frame | |||
| Feeder | Feeder Type | Adjustable Distance, Rotatable, Type A | Adjustable Distance, Type B | Feeder and Water Tank | Universal Rotating Water Tank | ||
| Feeder Installation Method | Hanging Type | Receiving Rack ② | Approximately 1200mm | ||||
| Number of Wire Outputs | 1≤N≤2 | 1≤N≤4 | Oil Filling Method | Non-Stop Oil Filling | |||
| Available Wire Diameter | 0.65～1.7mm (with Type A Insert) | 0.65～1.7mm (with Type B Insert) | Wire Cutting Structure | Height Adjustable | |||
| Wire Spacing | 30～184mm | 28～100mm | Applicable Injection Molding Machine Models | Hand Press Machine (Semi-Automatic Machine) | |||
| Wire Arrangement Method | Horizontal Linear Arrangement | ①: Air duct and wire cutting structure height have other sizes that require special order notes. ②: Receiving rack length has other sizes that require special notes. | |||||
| Material Placement Rack | Water Outlet Method | Clamping Water Outlet | |||||
| Product Placement Method | Vertical Linear Arrangement (≤2 Rows) | Vertical Linear Arrangement (≤4 Rows) | |||||
| Injection Molding Machine Selection | Compatible Injection Molding Machine Models | Fully Automatic Machine | |||||
| Compatible Injection Molding Machine Size | Machine Body Width < 1000 | ||||||
Previous Page:
More products
Project online consultation
If you have found your desired products or want to design your exclusive products, please feel free to contact, we are here for you 24/7.
LUOHE TECHNOLOGY
Tel: +86-195 3876 5841
E-mail:lhsales@luohetech.cn
Address: Floor 6th, Building 30, Zhongnan Hi-tech Industrial Park, No. 6, Xinhua Avenue, Dongsheng Village, Chenjiang street, Huizhou City, Guangdong Province
Copyright © HUIZHOU LUOHE TECHNOLOGY CO., LTD. All rights reserved
Power by:www.300.cn | SEO | Privacy Policy