Flower-branch robotic arm
Key words:Automation Equipment
Classification:
Product Description
Product Features:
1. It features an innovative structural design, and the entire machine is protected by patents.
2. The entire device is crafted from high-quality materials with meticulous attention to detail.
3. The number of iron wires is available in four models: 2, 4, 6, and 8.
4. The standard length of the wire is 500 mm; with the addition of a dual-conductor configuration, it can be extended to 800 mm.
5. The compatible wire diameter range is 0.9 mm to 1.4 mm; when used with an independent push block, this range can be extended to 0.45 mm to 2.3 mm.
6. Both the wire‑feeding mechanism and the product‑clamping device are equipped with sensors, effectively preventing die‑pressing risks.
7. The robotic arm’s beam is available in two lengths—1,480 mm and 1,800 mm—and can be paired with all types of manual bottle‑blowing machines that accommodate mold diameters ranging from 300 mm to 450 mm.
8. The mold-opening mechanism employs a servo motor–reducer configuration, delivering high torque while achieving energy efficiency.
9. The material‑discharge rack is equipped with a sprue‑removal device. 10. The robotic arm integrates both product‑gripping and air‑blowing functions.
Product Specifications:
Flower‑branch robotic arm – examples of hand‑punching machine models
| Key parameters | Aircraft model | ||
| 1480HZ-N-500 | 1800HZ-N-650 | ||
| Flower-branch robotic arm | Maximum fuselage width | Approximately 1620 mm | Approximately 1950 mm |
| Effective fuselage height | Approximately 1380 mm | Approximately 1700 mm | |
| Maximum fuselage height | Approximately 1580 mm | ||
| Minimum penetration depth of the clamp | 165mm | ||
| Allow the mold to be below the mounting plane value. | 170mm | ||
| Maximum wire length | 500mm | 650mm | |
| Feeder | Feeder type | Style B | |
| Feeder installation method | Left-side hanging type | Wall-mounted | |
| Number of tapping lines | 1 ≤ N ≤ 4 | 1 ≤ N ≤ 12 | |
| Available wire diameter | 0.65–1.7 mm (standard insert) | ||
| Wire spacing | ≥28 | ||
| Arrangement of iron wires | Horizontally arranged in a straight line | ||
| Material rack | Drainage method | Clamp the sprue | |
| Product material placement method | Flip ≤90°, lay flat | ||
| Injection Molding Machine Selection | Compatible with injection molding machine models | Draft beer dispenser (semi-automatic) | |
| Compatible with injection molding machine dimensions | Within a tolerance of 400 mm | ||
Product Specifications:
Flower-branch robotic arm – examples of automatic machine models
Key parameters | Aircraft model | ||
2000HZ-N-650 | 2200HZ-N-650 | ||
Robotic arm | Maximum fuselage width | Approximately 2150 mm | Approximately 2350 mm |
Maximum fuselage height | Approximately 1950 mm | ||
Minimum penetration depth of the clamp | 165mm | ||
Allow the mold to be below the mounting plane value. | 170mm | ||
Maximum wire length | 650mm | ||
Feeder | Feeder type | Adjustable spacing, Style B | |
Feeder installation method | Wall-mounted | ||
Number of tapping lines | 1 ≤ N ≤ 14 | ||
Available wire diameter | 0.65–1.7 mm (standard insert) | ||
Wire spacing | ≥26+D (wire diameter) | ||
Arrangement of iron wires | Horizontally arranged in a straight line | ||
Material rack | Drainage method | Clamping sprue removal, hooking sprue removal | |
Product material placement method | Flip ≤90°, lay flat | ||
Injection Molding Machine Selection | Compatible with injection molding machine models | Fully automatic machine | |
Compatible with injection molding machine dimensions | Body width: 800–1200 mm | ||
Common flower branch machine models:
Model | Injection molding machine model | Number of tapping lines | Model number | Non-standard customization | Beam type |
Flower branch machine | Draft beer machine (S) | 2 items | 1400HZ-2-500 | Double‑stage guiding (SD), three‑plate mold (SBM), rotary plus material‑ejecting (BL), in‑line insertion (LC) with extended stroke, (850/1000), and large plate clamps (BJ) with 12 or more rows. | Standard beam |
4 items | 1400HZ-4-500 | ||||
6 items | 1800HZ-6-650 | ||||
8 items | 1800HZ-8-650 | ||||
10 items | 1800HZ-10-650 | ||||
12 items | 1800HZ-12-650 | ||||
Automaton⑵ | 4 items | 1800HZ-4-650 | |||
8 items | 1800HZ-8-650 | ||||
4 items | 2000HZ-4-650 | ||||
8 items | 2000HZ-8-650 | ||||
10 items | 2200HZ-10-650 | Wide beam | |||
12 items | 2200HZ-12-650 | ||||
14 items | 2200HZ-14-650 | ||||
Automaton (Z) | 24 articles | 2200BJ-24-650 | / | Wide beam | |
Draft beer machine⑶ | 24 articles | 2200BJ-24-650S | With mold-opening system |
Previous Page:
More products
Project online consultation
If you have found your desired products or want to design your exclusive products, please feel free to contact, we are here for you 24/7.
LUOHE TECHNOLOGY
Tel: +86-195 3876 5841
E-mail:lhsales@luohetech.cn
Address: Floor 6th, Building 30, Zhongnan Hi-tech Industrial Park, No. 6, Xinhua Avenue, Dongsheng Village, Chenjiang street, Huizhou City, Guangdong Province
Copyright © HUIZHOU LUOHE TECHNOLOGY CO., LTD. All rights reserved
Power by:www.300.cn | SEO | Privacy Policy